Reliable Service
Fully Trained Staff
Competitive Prices
Send us a message
Liquid screed, a self-levelling mixture, comprises cement, water, and latex additives. Using liquid screed on your floors provides the highest possible standard of finish. It can also be poured over damaged or poor-quality substrate floors and spread to fill the gaps, holes, and voids of the surface, making them even and regular.
KM Flow Screed specialises in installing liquid screed in Maidenhead, serving its customers by providing a flawless finish to the floor surfaces. If you are planning a floor renovation project, connect with us and expect the highest standard of service for your residential or commercial site.
Need Assistance?
Advantages of Using Liquid Screed
Choosing a liquid floor screed in Maidenhead is a cost-effective way of preparing a floor that sets comparatively fast and offers you the following advantages:
- Affordability
- Better thermal conductivity
- Even and levelled floor
- High quality finishing
- Improved efficiency
- Longevity
- Quick installation
- Smooth floor
You can choose to lay carpets or fit tiles, wooden floors and any other type of flooring system over the liquid screed.
Preparation and Installation Process
Our installers ensure to provide high-quality and hard-wearing liquid screed services in Maidenhead and complete the process in the following steps:
- Conducting a site survey to analyse if the site needs to be prepared before initiating the installation work.
- Cleaning the floor surfaces to remove any debris, grease, oil, paint or extra material to ensure adequate adhesion of liquid screed to the floor.
- Making sure to remove the residues of cleaning products such as detergents or soaps (if used).
- Mending the cracks, if present on the surface, to prevent their reflection in the freshly prepared screed floor.
- Installing a DPM (Damp Proof Membrane) to prevent the ground dampness from entering the screeding and other floor materials.
- Adding an extra barrier layer in the form of an airtight membrane if your home is located in a place where radon gas emissions are present, to avoid their seepage.
- Applying a sealant or primer on the base surface to allow for better bonding between the base surface and liquid screed.
- Adding the liquid screed and allowing it to set for up to a minimum of 24 to 48 hours before you can walk or lay any flooring material over it.
Contact us
Our liquid screed contractors in Maidenhead have years of experience and are available to make your floor surfaces level and smooth as per your requirements. Contact us to get the cost quote.
FAQ’s
Is it worth using liquid screed?
What are the other names of liquid screed?
How much duration is required to lay liquid screed on a floor?
It takes almost 25 to 35 minutes to lay liquid screed on a 100m2 floor, providing it with high flexural strength and thin layer finishing. After its installation, it takes 24 to 48 hours to set, after which it is ready to walk on.
However, it would help if you waited at least seven days before installing any heavy or permanent things, like furniture, electrical appliances and equipment, or any type of flooring.
Is liquid screed an environmentally friendly material?
Where can the liquid screed be used?
Liquid screed can be used in any indoor place, ranging from domestic to commercial properties. It is also suitable for those places which are subjected to high temperatures. Using liquid screed during floor renovation is best to fill the surface cracks and gaps.